Autocad Dimensions Slowing Drawing Down
Things that can slow performance in Civil 3D/AutoCAD
Last updated: 2020-10-26
There are many factors that contribute to overall system speed which can affect Civil 3D/AutoCAD performance.
- Hardware (CPU, hard drive, RAM, video card)
- Network (cable, switches, server)
- Operating system
- Software
-
Files (number, size, objects within files, connections to other files)
The issues and solutions in this topic are not a complete list of every possible issue, but they give a good sampling of common issues and how to fix them.
Issue: Optimize the performance of your AutoCAD-based program in Windows
Solution
Follow these guidelines to improve your AutoCAD performance. Determine which of them provides the best results for your environment. Not all guidelines have the same effect on all systems, so test and compare results.
Windows environment guidelines
- Verify that your hardware meets or exceeds AutoCAD's minimum system requirements. See System requirements for AutoCAD.
- When running other applications at the same time as AutoCAD, be sure at least 2GB of RAM is available to AutoCAD.
- Update your computer's graphics card driver to the latest version available. See How to update to the latest certified video driver.
-
Turn off all compatibility settings except for Run This Program As Administrator:
- File Explorer > Right-click AutoCAD executable file > Properties
-
Compatibility tab > Deselect all options except Run This Program As Administrator
-
- File Explorer > Right-click AutoCAD executable file > Properties
-
Stop the Windows Presentation Foundation Font Cache:
- Windows Start > Search for \'Services\' > Click View Local Services
-
Services dialog box > Scroll down to Windows Presentation Foundation Font Cache 3.0.0.0 > Right-click > Stop
-
- Windows Start > Search for \'Services\' > Click View Local Services
- Delete the contents of the Windows TEMP folder. See How to delete temporary files in Windows.
- Disable your antivirus program to see if it's slowing down your AutoCAD software. If it is, set up antivirus exclusions. See How to set up Antivirus (AV) exclusions to improve stability and performance of Autodesk software.
- Eliminate slow network performance. See Working with shared contents: eliminating slow network performance (blog).
- If you're using Windows 7, change the desktop theme to Windows Basic.
Civil 3D/AutoCAD guidelines
- Toggle hardware acceleration on and off to see which setting improves your performance. See How to enable or disable hardware acceleration in AutoCAD.
- Download and install the latest service pack and any hotfixes for your AutoCAD software. See Install Updates, Add-ons, and Enhancements.
-
Options dialog > Display tab > Turn off
- Show Tool Tips
- Show Rollover Tool Tips
- Turn off Quick Properties QPMODE set to -1
- Remove network paths from Options dialog > Files tab > Support File Search Path.
- Remove any third-party plugins that are installed.
- Clean up drawings with performance issues. See How to repair corrupt AutoCAD files. Examine highly nested blocks and consider exploding and purging them.
- Use the UCSICON command to activate the origin in the drawing. Determine whether any data or XREFs are located far from the origin. If so, use the MOVE command to relocate the data closer to the origin. Choose coordinates close to the origin when loading drawings via XREF.
- Disable one or more system variables which may impact graphics performance: See Improving AutoCAD performance with older or low-end graphics cards
Issue: Large amounts of text or hatches degrading performance
AutoCAD drawings which contain large amounts of text or hatches may degrade performance. In most cases this is due to older or low-end video cards, however, depending on the amount of data being displayed high-end graphic cards may be affected as well.
Causes
Several new system variables were introduced with AutoCAD 2015. These variables will display information about selection sets in the properties palette or high light objects when selected or hovered over. This may affect performance with some graphic cards.
Solution
- Close or Autohide the Properties palette until it's needed.
-
Change the following variables to off within AutoCAD (type them on the command line) until they are needed:
ANNOALLVISIBLE set to "0"
Hides or displays annotative objects that do not support the current annotation scale.
The ANNOALLVISIBLE setting is saved individually for model space and each layout.
NOTE: When ANNOALLVISIBLE is set to 1, annotative objects that support more than one scale will only display one scale representation.
COMMANDPREVIEW set to "0"
Controls whether a preview of the possible outcome of the command is displayed.
NOTE: The SELECTIONPREVIEW system variable value is ignored when COMMANDPREVIEW is on.
DRAWORDERCTL set to "0"
Controls the default display behavior of overlapping objects when they are created or edited.
Info: Full draw order display may slow some editing operations.
DYNMODE set to "0"
Turns Dynamic Input features on and off.
When all features are on, the context governs what is displayed.
If dynamic prompts are on ( DYNPROMPT is set to 1), they are displayed when DYNMODE is set to 1, 2, or 3.
When DYNMODE is set to 1, 2, or 3, you can turn off all features temporarily by holding down the temporary override key F12
ISAVEPERCENT set to "0"
Controls the amount of space allocated in DWG files for incremental saves, which affects the number of quick save operations that can be performed before a full save is required.
When the file save estimate exceeds the specified percentage, the next save will be a full save. Valid values can range from 0 to 100 percent.
- A value of 0 means that all save operations are full saves. A full save optimizes the size of a DWG file, but is noticeably slower on large drawings.
-
A value of 100 increases the space available to append changes to the maximum possible. This value results in the greatest number of incremental quick save operations between full saves at the expense of larger file sizes.
Info: Saving to a different format always results in a full save.
LAYOUTREGENCTL set to "0" or "1"
Specifies how the display list is updated in the Model tab and layout tabs.
For each tab, the display list is updated either by regenerating the drawing when you switch to that tab or by saving the display list to memory and regenerating only the modified objects when you switch to that tab.
The performance gain achieved by changing the LAYOUTREGENCTL setting is dependent on several factors, including the drawing size and type, the objects contained in the drawing, the amount of available memory, and the effect of other open drawings or applications. When LAYOUTREGENCTL is set to 1 or 2, the amount of additional memory used is the size of the Model tab's display list multiplied by the number of viewports in each layout for which the display list is saved.
If LAYOUTREGENCTL is set to 1 or 2 and performance seems slow in general or when you switch between tabs for which the display list is saved, consider changing to a setting of 0 or 1 to find the optimal balance for your work environment.
Regardless of the LAYOUTREGENCTL setting, if you redefine a block or undo a tab switch, the drawing is regenerated the first time you switch to any tab that contains saved viewports.
ORTHOMODE set to "0"
Constrains cursor movement to the perpendicular.
When ORTHOMODE is turned on, the cursor can move only horizontally or vertically relative to the UCS and the current grid rotation angle
PALETTEOPAQUE set to "1"
Controls whether palettes can be made transparent.
When transparency is available and turned on, use the Transparency option on the shortcut menu to set a different degree of transparency for the current palette or for all palettes.
When hardware acceleration is enabled, the settings 2 and 3 are available; when disabled, only the settings 0 and 1 are available.
PROPERTYPREVIEW set to "0"
Controls whether you can preview the changes to currently selected objects when you roll over drop-down lists and galleries that control properties.
Info: Property previews are displayed only from the ribbon and the Properties palette. They are not available from other palettes.
QPMODE set to "0"
Controls whether the Quick Properties palette is displayed when objects are selected.
ROLLOVERTIPS set to "0"
Controls the display of rollover tooltips when the cursor hovers over an object.
The content in tooltips can be customized in the Customize User Interface (CUI) Editor.
SAVEFIDELITY set to "0"
Controls the visual fidelity for annotative objects in AutoCAD 2007 and earlier.
This setting affects drawings only when saving to AutoCAD 2007 or earlier file formats.
SELECTIONCYCLING set to "0"
Controls the display options associated with overlapping objects and selection cycling.
Ctrl+W to toggle the current setting on and off.
When you roll over overlapping 2D objects, options are available to alert you and let you select between the objects.
SELECTIONPREVIEW set to "0"
Controls the display of selection previewing.
Objects are highlighted when the pickbox cursor rolls over them. The highlighting indicates that the object would be selected if you clicked it. The setting is stored as a bitcode using the sum of the following values:
Info: The SELECTIONPREVIEW system variable value is ignored when COMMANDPREVIEW is on.
UCSDETECT set to "0"
Controls whether dynamic UCS acquisition is active when creating objects involving 3D planar surfaces.
You can align the UCS dynamically when your cursor hovers over a planar face on a 3D solid, a planar mesh element, or a planar point cloud segment while as you create an object.
Info: Dynamic UCS alignment does not detect planar surface objects or 2D geometry.
WHIPTHREAD set to "3"
Controls whether to use an additional processor to improve the speed of operations such as ZOOM that redraw or regenerate the drawing.
WHIPTHREAD has no effect on single processor machines.
When multithreaded processing is used for redraw operations (value 2 or 3), the order of objects specified with the DRAWORDER command is not guaranteed to be preserved for display, but is preserved for plotting.
If you are running Windows Vista or Windows 7, try turning off Aero by setting your desktop theme to Windows Basic.
isaacsonlathe1992.blogspot.com
Source: https://c3dkb.dot.wi.gov/Content/c3d/fil-sftwr-mgt/fil-sftwr-mgt-fix-slo.htm
0 Response to "Autocad Dimensions Slowing Drawing Down"
Post a Comment